NC伺服数控模内攻牙机特点：

NC伺服马达驱动型NC servomotor driving

不受冲床行程的限制。可以在冲床模具内使用也可以在生产线上使用;There is no limite to punch stroke.it can be used in-die or in-line processing.

彩色液晶触摸屏控制界面，可以人性化登入及修改所有攻牙应用参数Use the color touch screen controller to enter humanized and change all the application parameter of tapping.

可存储 45 种不同的攻丝方案Can save 45 kinds of different tapping ways

自动和手动安全操控与冲床同步，单次冲程结束时可检测丝锥Automatic and manual operation,punch processing are synchronously.Taps can be detected while a stroke finishing.

可以加工各种规格的螺丝孔M132．也可以同时加工多个螺丝孔，最多20孔。adaptable to tap up to 20 holes at the same time with taps size from M1 to M32.

攻牙方向可以水平也可以垂直加工螺丝孔，可以加工通孔或盲孔．The tapping direction can be flat or vertical.Also tap through holes or blind holes.

配备先进的丝锥自动冷却润滑供油系统，最快速度达150次／分钟．With advanced self-cooling and lubrication oil-feeding system,the fastest speed up to 150times/M

实时显示攻丝状态，可记录冲压次数Tapping status real-time displayed,ability to record the punching number of times.

安装快捷．独立的操控电箱使安装调试简便化Install quickly.independent sevo operation units make installation and debugging easily.

科尔诺森的领先筒夹技术使最小孔间距为9mm;Advanced sleeve barrel lock technology minimize the distance between holes to 9MM；

配备攻牙过载保护系统With torque overload protection system