关键字：test,bench,喷油泵试验台基地,生产喷油泵试验台test,bench,常年研发喷油泵试验台
dbzz喷油泵试验台功能介绍：
喷油泵试验台根据所调试的油泵，选用适当的附具，可进行如下项目的调试：
1测试不同转速下喷油泵的各缸供油量和供油均匀性。
2测试喷油泵的供油始点及供油间隔角度。
3调速器工作性能的检查及调整。
4压力补偿性能的测试及检查。
5分配泵工作性能的测试及调整。
6冷启动装置及电磁阀性能检查。
7分配泵各种转速下的回油量测量。
8分配泵各种转速下的内压测定。
9喷油泵密封性能实验。
10检查输油泵自吸功能。
11内置高可靠性卧式打气泵。
12三“T”型工作台、宽体定位支架，设备运转稳定 油泵试验台生产厂家 一三八五四八二二三九五12PSB系列喷油泵实验试验台生产基地
采用工业计算机标准，可靠性高
按照“人机工程学”原则设计，布局合理，使用方便
强电系统采用SSR固态继电器无触点控制，安全可靠
上位机采用电子盘和DOS平台，抗震、耐冲击
压力、温度、提前角等参数均为屏幕数显
The purpose of the pump test-bed
The oil pump of pump test-bed based on the debugging and selection of appropriate affix, debugging for the following projects:
1 testing the fuel injection pump under different rotation speed of each cylinder oil and oil supply uniformity.
2 test of the fuel injection pump fuel supply starting point and interval Angle oil.
3 speed governor and adjust the working performance of the inspection.
4 pressure compensation performance test and check.
5 distribution pump performance test and adjustment.
6 cold start device and electromagnetic valve performance examination.
7 allocated amount of oil pump under different rotation speed measurement.
8 distribution of internal pressure measurement of the pump under different rotation speed.
9 for fuel pump seal performance experiment.
10 check oil transfer pump self-priming function.
11 the built-in high reliability horizontal pump.
12 three "T" type workbench, wide-bodied positioning support, equipment operation stability |
添加到收藏夹
点击发邮件咨询
举报此信息
收藏到用户中心
![点击这里给[ 泰安市岱岳区泰利达试验设备服务中心的邹凡强 ]发消息](/skin/v1/imgs/qqonline.gif "点击这里给[ 泰安市岱岳区泰利达试验设备服务中心的邹凡强 ]发消息")
